Dingxin static glass film,This high-quality glass film is designed to provide superior protection and clarity for your glass surfaces.

Before Application:

1. Ensure that the glass surface is clean and dry. Remove any dust, dirt, or grease using a clean cloth and glass cleaner.

2. Inspect the glass film for any defects or damages before starting the application process.

Application Steps:

1. Measure the glass surface to determine the size of the film needed. Cut the film to fit the glass surface accurately.

2. Remove the backing paper from the film and align it with the glass surface. Start at one end of the glass and slowly apply the film.

3. Use a soft cloth or squeegee to press out any bubbles or wrinkles in the film. Ensure that the film adheres evenly to the glass surface.

4. Trim any excess film around the edges of the glass using a utility knife or scissors.

After Application:

1. Check the film periodically to ensure it remains in place and is not damaged or peeled off.

2. If any part of the film becomes loose or damaged, use a damp cloth to clean the area and reapply the film.

Tips for Application:

1. Apply the film in a controlled environment to prevent dust and dirt from getting trapped between the film and glass surface.

2. Apply pressure evenly while pressing out bubbles to ensure the film adheres properly.

3. Avoid using harsh chemicals or cleaners on the film as it may damage its protective layer.

The Dingxin static glass film is easy to apply and provides long-lasting protection for your glass surfaces. It offers superior clarity and resistance to static electricity, ensuring your glass surfaces remain clean and free from dust accumulation. Visit our official website to learn more about our products !